NovaStar MX_2x ST2110 (25G) Input Card

Description

ST 2110 Specifications (25G)

General Overview:

• Primary/Backup: 2 primary, 2 backup connection.
• Standards Supported:
  • SMPTE ST 2110 (-10, -20)
  • SMPTE 2059 (-1, -2)
  • SMPTE 2022-7 (for backup).

Resolution Capabilities:

• Maximum Resolution: 4096×2160@60Hz or 8192×1080@60Hz.
• Minimum Resolution: 800×600@60Hz.
• Max Width: 8192 pixels (e.g., 8192×1080@60Hz).
• Max Height: 8192 pixels (e.g., 1080×8192@60Hz).

Frame Rates Supported:

23.98 / 24 / 25 / 29.97 / 30 / 47.95 / 48 / 50 / 59.94 / 60 / 71.93 / 72 / 75 / 100 / 119.88 / 120 Hz

VMP Control Features:

• Load video stream configurations via SDP files or manual input.
• Set resolution for ST 2110 sources in VMP.
  • Preset resolutions up to 8192×1080@60Hz.
  • Custom input resolutions allowed.

NMOS Management:

• NMOS discovery and control compliant with IS-04 and IS-05 standards.

Color Gamut:

• Rec.709 / DCI-P3 / Rec.2020.

IP Addressing:

• Supports both IPv4 DHCP and static IP addressing.

Multicast Protocol:

• IGMPv3 and IGMPv2.

Ethernet:

• 25 GbE:
  • IEEE 802.3cc (25GBASE-LR)
  • IEEE 802.3by (25GBASE-SR).

Optical Transceiver:

• Note: The ST 2110 card does not include an optical transceiver by default. Users must purchase separately.
  • Supports SFP28 (25GBASE-LR/SR/CR).
  • Recommendation: Accelink 25GBASE-LR (10 km) module.

Cables:

• Recommended optical fiber cables: OS1/OS2.
  • Transmission mode: Single-mode duplex.
  • Diameter: 9/125 μm.
  • Interface Type: LC.
  • Insertion Loss: ≤ 0.3 dB.
  • Return Loss: ≥ 45 dB.