NovaStar MSD300-1 Sending Card

Description

Compared to the original MSD300, the MSD300-1 removes the audio jack that was rarely used.

The NovaStar MSD300-1 is a sending card developed by NovaStar. It supports 1x DVI input and 2x Ethernet outputs. A single MSD300-1 supports input resolutions up to 1920×1200@60Hz and loads up to 1,300,000 pixels.
The NovaStar MSD300-1 communicates with PC via type-B USB port. Multiple MSD300-1 units can be cascaded via UART port.
As a highly cost-effective sending card, the MSD300-1 can be mainly used in the rental and fixed installation  applications, such as concerts, live events, security monitoring centers, Olympic Games and various sports centers.

1x SL-DVI input connector
2x Gigabit Ethernet outputs
1x light sensor connector
1x type-B USB control port
2x UART control ports used for device cascading. Up to 20 devices can be cascaded.

1x SL-DVI input connector

• Resolutions up to 1920×1200@60Hz
• Custom resolutions supported

           Maximum width: 3840 (3840×600@60Hz)

           Maximum height: 3840 (548×3840@60Hz)

• DOES NOT support interlaced signal input.

2x RJ45 Gigabit Ethernet ports

• Capacity per port up to 650,000 pixels
• Redundancy between Ethernet ports supported

Pixel level brightness and chroma calibration
Working with NovaLCT and NovaCLB, the sending card supports brightness and chroma calibration on each LED, which can effectively remove color discrepancies and greatly improve LED display brightness and chroma consistency, allowing for better image quality.