NovaStar Taurus TB70 Controller
Available on backorder
The brand new NovaStar TB70 has 6 output ports to support larger, 3.9 million pixel displays. Not ready for sale yet, will upload more information when it is available.
- Loading capacity up to 3,900,000 pixels
Maximum width: 4096 pixels
Maximum height: 4096 pixels
- 6x Gigabit Ethernet ports
All these six ports serve as primary by default.
Users can also set two as primary and the other
two as backup.
- 1x Stereo audio connector
The audio sample rate of the internal source is fixed at 48 kHz. The audio sample rate of the external source supports 32 kHz, 44.1 kHz, or 48 kHz. If NovaStar’s multifunction card is used for audio output, audio with a sample rate of 48 kHz is required.
- 1x HDMI 1.4 connector
Maximum output: 1080p@60Hz, support for HDMI loop
- 1x HDMI 1.4 connector
In synchronous mode, video sources input from this connector can be scaled to fit the entire screen automatically.
- 2x sensor connectors
Connect to brightness sensors or temperature and humidity sensors.
- 1x USB 3.0 (Type A) port
Allows for playback of content imported from a USB drive and firmware upgrade over USB.
- 1x USB (Type B) port
- 1x Gigabit Ethernet port
Connects to a LAN, public network, or computer
for content publishing and screen control.
- Powerful processing capacity
− Quad-core ARM A55 processor @1.8 GHz
− Support for H.264/H.265 4K@60Hz video
− 1 GB of onboard RAM
− 16 GB of internal storage
- Flawless playback
1x 4K video playback or 2x 1080p video
- All-round control plans
− Enables users to publish content and
control screens from a computer, mobile
phone, or tablet.
− Allows users to publish content and control
screens from anywhere, anytime.
− Allows users to monitor screens from
- Switching between Wi-Fi AP and Wi-Fi STA
− In Wi-Fi AP mode, the user terminal
connects to the built-in Wi-Fi hotspot of the
TB70. The default SSID is “AP+Last 8 digits of SN” and the default password is “12345678”.
− In Wi-Fi STA mode, the user terminal and
the TB70 are connected to the Wi-Fi
hotspot of a router.
- Synchronous and asynchronous modes
− In asynchronous mode, the internal video
− In synchronous mode, the video source
input from the HDMI connector works.
- Synchronous playback across multiple screens
− NTP time synchronization
− GPS time synchronization (The specified
4G module must be installed.)
- Support for 4G modules
The TB70 ships without a 4G module. Users have to purchase 4G modules separately if needed.
Network connection priority: Wired network > WiFi network > 4G network
When multiple types of networks are available,
the TB70 will choose a signal automatically
according to the priority.
|Dimensions||15 × 11 × 3 in|