NovaStar Taurus TB70 Controller

$888.00

Available on backorder

SKU: NOVASTAR-TB70 Category: Brand:

Description

The brand new NovaStar TB70 has 6 output ports to support larger, 3.9 million pixel displays. Not ready for sale yet, will upload more information when it is available.

  • Loading capacity up to 3,900,000 pixels
    Maximum width: 4096 pixels
    Maximum height: 4096 pixels
  • 6x Gigabit Ethernet ports
    All these six ports serve as primary by default.
    Users can also set two as primary and the other
    two as backup.
  • 1x Stereo audio connector
    The audio sample rate of the internal source is fixed at 48 kHz. The audio sample rate of the external source supports 32 kHz, 44.1 kHz, or 48 kHz. If NovaStar’s multifunction card is used for audio output, audio with a sample rate of 48 kHz is required.
  • 1x HDMI 1.4 connector
    Maximum output: 1080p@60Hz, support for HDMI loop
    Input
  • 1x HDMI 1.4 connector
    In synchronous mode, video sources input from this connector can be scaled to fit the entire screen automatically.
  • 2x sensor connectors
    Connect to brightness sensors or temperature and humidity sensors.
  • 1x USB 3.0 (Type A) port
    Allows for playback of content imported from a USB drive and firmware upgrade over USB.
  • 1x USB (Type B) port
    Reserved
  • 1x Gigabit Ethernet port
    Connects to a LAN, public network, or computer
    for content publishing and screen control.
    Performance
  • Powerful processing capacity
    − Quad-core ARM A55 processor @1.8 GHz
    − Support for H.264/H.265 4K@60Hz video
    decoding
    − 1 GB of onboard RAM
    − 16 GB of internal storage
  • Flawless playback
    1x 4K video playback or 2x 1080p video
    playback
    Function
  • All-round control plans
    − Enables users to publish content and
    control screens from a computer, mobile
    phone, or tablet.
    − Allows users to publish content and control
    screens from anywhere, anytime.
    − Allows users to monitor screens from
    anywhere, anytime.
  • Switching between Wi-Fi AP and Wi-Fi STA
    − In Wi-Fi AP mode, the user terminal
    connects to the built-in Wi-Fi hotspot of the
    TB70. The default SSID is “AP+Last 8 digits of SN” and the default password is “12345678”.
    − In Wi-Fi STA mode, the user terminal and
    the TB70 are connected to the Wi-Fi
    hotspot of a router.
  • Synchronous and asynchronous modes
    − In asynchronous mode, the internal video
    source works.
    − In synchronous mode, the video source
    input from the HDMI connector works.
  • Synchronous playback across multiple screens
    − NTP time synchronization
    − GPS time synchronization (The specified
    4G module must be installed.)
  • Support for 4G modules
    The TB70 ships without a 4G module. Users have to purchase 4G modules separately if needed.
    Network connection priority: Wired network > WiFi network > 4G network
    When multiple types of networks are available,
    the TB70 will choose a signal automatically
    according to the priority.

Additional information

Weight 4 lbs
Dimensions 15 × 11 × 3 in