NovaStar T30 Multimedia Player

Description

This is the replacement for the NovaStar T3 card.

• • Loading capacity up to 650,000 pixels
    Maximum width: 4096 pixels
    Maximum height: 4096 pixels
  • 2x Gigabit Ethernet ports
    One serves as primary and the other as backup.
  • 1x Stereo audio connector
    The audio sample rate of the internal source is fixed at 48 KHz. The audio sample rate of the external source supports 32 KHz, 44.1 KHz, or
    48 KHz. If NovaStar’s multifunction card is used for audio output, audio with a sample rate of 48 KHz is required.

Input

• • 2x sensor connectors
    Connect to brightness sensors or temperature
    and humidity sensors.
    Control
  • 1x USB 3.0 (Type A) port
    Allows for playback of content imported from a
    USB drive and firmware upgrade over USB.
  • 1x USB (Type B) port
    Reserved
  • 1x Gigabit Ethernet port
    Connects to a LAN, public network, or computer
    for content publishing and screen control.
    Performance
  • Powerful processing capacity
    − Quad-core ARM A55 processor @1.8 GHz
    − Support for H.264/H.265 4K@60Hz video
    decoding
    − 1 GB of onboard RAM
    − 16 GB of internal storage
  • Flawless playback
    2x 4K, 6x 1080p, 10x 720p, or 20x 360p video
    playback
    Functionality
  • All-round control plans
    − Enables users to publish content and
    control screens from a computer, mobile
    phone, or tablet.
    − Allows users to publish content and control
    screens from anywhere, anytime.
    − Allows users to monitor screens from
    anywhere, anytime.
  • Switching between Wi-Fi AP and Wi-Fi STA
    − In Wi-Fi AP mode, the user terminal
    connects to the built-in Wi-Fi hotspot of the
    T30. The default SSID is “AP+Last 8 digits
    of SN” and the default password is
    “12345678”.
    − In Wi-Fi STA mode, the user terminal and
    the T30 are connected to the Wi-Fi hotspot
    of a router.
  • Synchronous playback across multiple screens
    − NTP time synchronization
    − GPS time synchronization (The specified
    4G module must be installed.)
    − RF time synchronization (The specified RF
    module must be installed.)
  • Support for 4G modules
    The T30 ships without a 4G module. Users have
    to purchase 4G modules separately if needed.
    Network connection priority: Wired network > WiFi network > 4G network When multiple types of
    networks are available, the T30 will choose a
    signal automatically according to the priority